How to Repair Garage Door Spring | Effective Guidelines To Repair Garage Doors

The garage door springs mainly support the total weight of the garage door. The springs get stretched under heavy pressure, loosen and tighten as you open or close the garage doors repeated times. It’s the springs of the garage doors that support and lift more than 300 pounds weight of the garage doors. Therefore, there are high chances that the garage door springs can break anytime. If the springs of your garage door have recently got broken and if you are thinking how to repair garage door spring, then don’t worry. The spring can often break due to the immense pressure and it is not something rare. It is possible to repair the springs by your own. You just need to follow some simple techniques to get these back in the working condition.

• Lift the door manually by pulling the red emergency release cord placed above the garage door.

• Identify the type of spring that you have. The garage door springs can be of two types like torsion springs and the extension springs. The torsion springs work under immense tension and it is the tension of these springs that lift the weight of the garage door. On the other hand, the extension springs are located on the both sides of the door and the springs stretched as the garage door lowers.

• After learning which type of springs you have, the next step of how to repair garage door spring is to purchase new springs. It is better to replace all the springs at a time, otherwise the second one would break soon as having a new and an old spring together throws off the balance of the door.

• The next step is to install the new garage door springs. Be careful while doing this as it is not only a complicated and lengthy process, but also quite dangerous as the garage door springs remain under immense tension. Make sure that you have all the right tools with you before starting this job.

Want to know more about how to repair garage door spring cable? Then pay a visit to www.doorwindowrepairs.com.