The garage door springs are the part of the garage doors, not the garage door opener. These springs help in both raising and lowering the door easily. These springs have just only one function and thus these last for a really long time. Over the time and with the change of the weather, the metal of the springs tends to weaken and thus the spring results in a break. The torsion or the tension springs are one type of spring for the garage doors.
.png)
Adjusting the torsion springs can really be very dangerous as the doors need to be down as well as under tension while adjusting. Wearing gloves and eye protection is also highly recommended. Besides, ensure that you have everything that you need before you start to fix garage door spring tension as the door would remain close during the repair.
You can start your work By securing the door track with a C clamp under the bottom most roller. This would prevent the door from opened even the springs become over tightened. The moveable end of the garage door springs are attached to the adjustment collars. The spring is locked in the proper position on the center shaft with the help of the setscrew in the collar. There are a number of holes across the collar edge. You have to insert one metal rod in any of the holes to hold the collar in the proper place.
The next step for garage door springs replacement is check the proper position of the setscrew in the collar before making any type of adjustments in order to check if there are any flats where the screw can be set into. The flats are mainly the flattened areas located in the shaft that assist in holding the screw in a more secure way. Therefore, you can use the rod in order to turn the collar to loosen or tighten the tension of the spring. After holding the collar in the right place, tighten and lock the setscrew in the new position. If you have any other question related to how to fix garage door spring tension, then you can log on to www.doorwindowrepairs.com
No comments:
Post a Comment